A factory distributor for KYB, Bilstein, Edelbrock, Monroe and Rancho shocks since 1988.
Posted in Nissan on May 27th, 2008
QUESTION:
I have a ‘92 Nissan 2WD pickup and somebody referred your website to me. I am interested in some KYB shocks and am having a hard time deciding on the Gasajust or the GR2 units. The roads/freeways out here in california have been getting bad and don’t look like they’ll get rebuilt anytime soon. Which [...]
Posted in Ford on May 21st, 2008
QUESTION:
I am looking for Edelbrock IAS Performer Truck Shocks and Struts part number for the front and back shocks for a;
2004 Ford F150 FX 4X4 Regular Cab (two little doors to back) 5.4 Liter Automatic 6.5 foot box Options;Will have an Auto Spring Kits 2 ½” leveling kit in the front. And [...]
Posted in Chevrolet on May 21st, 2008
QUESTION:
I would like to install a set of real good rear air shocks on my 70 chevy c10 pickup and also something on the front end to stop body roll around corners Could you tell me my options and prices?
ANSWER:
The 1970 C10s are listed in our online catalog.Here’s the link – – http://www.shockwarehouse.com/index.cfm?mode=results&selected_model=3782&selected_year=1970 On the front [...]
Posted in Uncategorized on May 17th, 2008
QUESTIONS:
I need shocks for an offroad vehicle, coilover 24inch total length pretty light weight load but extermely rough service. Any suggestions?
ANSWERS:
Here’s the Rancho Coil-overs – http://www.shockwarehouse.com/site/rancho_coil_over.cfm Bilstein does make coil-overs, but they offer many more options, such as valving, length, external reservoirs, etc.(Bilstein does not provide the springs though like the Rancho ones). Their charts are here – [...]
Posted in Chevrolet on May 13th, 2008
QUESTION:
I have a 2007 Chevy Silverado Crewcab with the 20″ wheels and high performance suspension. Are these the correct shocks for the truck?ANSWER:
You want to click on the Bilstein part numbers in the online catalog, there you will see pictures of the shocks. There are many different GM truck possibilities, so they best way is just to [...]
Posted in Toyota on May 13th, 2008
QUESTION:
In searching for the appropriate rear shock absorbers for my 1996 Toyota Tacoma 4WD Pickup, 2.7 L Fuel injected Engine I noted that your information only lists that model “with TRD.” I’ve never seen that designation before. Could you please tell me what “TRD” stands for before I order? Thanks
ANSWERS:
TRD – Toyota Racing Development. If your [...]
Posted in Ford on May 8th, 2008
QUESTION:
I HAVE A 2004 FORD F150 SUPERCREW(
2 WHEEL DRIVE
) WITH AN ANNOYING “BUMP” OR RATTLE IN THE FRONT END WHEN TRAVELING OVER ROUGH ROADS. I HAD THE FRONT END CHECKED AND THE SHOP SAID EVERYTHING WAS TIGHT. COULD THIS BE THE STRUTS OR STRUT MOUNTS? The truck has 140k miles.
ANSWER:
It’s always best to go with [...]
Posted in Trailer on May 5th, 2008
QUESTION:
I need 4 shocks for a 2003 alpinlite 5th wheel trailer,14,000GVW, 33ft long.2 Dexter axles.would like to have b ilstine or Monroe shocks. can you help me with the right cat #? I want to be sure that they are HEAVY DUTY
ANSWER:
The only company we have offering products for Trailers is Monroe. Those products are mentioned [...]
Posted in Bilstein on May 5th, 2008
QUESTION:
I have a 2003 sprinter 3500 van with dually in the rear 6 lug rims, will the bilstein touring package that u sell fit on my van, if not let me know what to order.
ANSWER:
Bilstein says their parts will only work on 6-lug wheel Sprinters – http://www.shockwarehouse.com/index.cfm?mode=results&selected_model=3950&selected_year=2003